https://www.agrotkindustrial.com/
8
Installation
Connecting Brush Cutter Cont
To keep contaminants from entering the hydraulic system; wipe off any dirt or dust from the
male or female hydraulic flat face couplers with a clean rag before attaching hoses.
Check that the hydraulic hoses are locked into the skid steer couplers before starting the
cutter.
DO NOT operate this machine if you can see the cutter blade
while seated in the operator
’
s seat. If you can see the cutter
blade, the back of the cutter is raised TOO HIGH. Lower the
cutter deck to avoid from being struck by flying debris.
Connecting Electrical Harness
Connect the electrical attachment harness from the Articulating cutter to the
electrical bulkhead connector mounted on the skid steer loader arm. A universal, 7,
8, or 14 pin pigtail harness adapter is available to make this connection. See Electrical
Drawings, on page 47 for more information.
