AgSense Aqua Trac Pro Скачать руководство пользователя страница 31

 

Exclusion of implied warranties – Your sole and exclusive remedy is product repair as 
provided in this Limited Warranty. Any implied warranties, including the implied 
warranties of merchantability or fitness for a particular purpose, are limited to two years 
or the shortest period allowed by law.

 

 

 

 

 

This warranty is extended to the original purchaser and any succeeding owner for the products 
purchased for use within the USA. 
Some states do not allow the exclusion or limitation of incidental or consequential damages. This 
warranty gives you specific legal rights, and you may also have the other rights which vary from 
state to state. To know what your legal rights are, consult your local or state consumer affairs 
office or your state’s Attorney General. 
  

DISCLAIMER:

 The use of Field Commander/Crop Link/Aqua Trac shall not be utilized by 

customer as a substitute for the Customer's personal observation of the manner in which 
Customer's irrigation equipment is functioning.  AgSense specifically advises Customer that this 
product is designed to enhance Customer's ability to control existing irrigation equipment and to 
provide the Customer with additional information about existing irrigation equipment.  Field 
Commander/Crop Link/Aqua Trac relies upon GPS, Satellite and Internet technology which not 
always functions properly, accordingly, AgSense disclaims any and all responsibility for the 
reliability of this technology.  Customer acknowledges that AgSense does not have the ability to 
control the reliability of GPS, Satellite and Internet Technology.  AgSense specifically disclaims 
any and all liability for Customer's failure to personally determine whether or not the irrigation 
equipment that belongs to Customer is functioning properly.  AgSense, its agents, members or 
officers will not be liable for Customer's loss of profits, business interruption, or any other type 
of consequential damages arising because of the failure to Customer's equipment, GPS, Satellite 
or Internet to function properly. 
  

CUSTOMER'S RESPONSIBILITIES:

 Customer agrees to keep the irrigation equipment upon 

which Field Commander/Crop Link/Aqua Trac is installed in good repair and maintenance.  
Customer acknowledges the importance of and agrees to keep all safety devices which came with 
Customer's irrigation equipment in working order.  Customer agrees to keep an end field stop 
and barricades in place to prevent damage to the irrigation equipment in the event that Field 
Commander/Crop Link/Aqua Trac malfunctions.  Customer agrees that Field Commander/Crop 
Link/Aqua Trac cannot solely replace the personal monitoring of the operation of irrigation 
equipment. 
  

REMEDY:

 Customer acknowledges that Field Commander/Crop Link/Aqua Trac’s sole 

obligation and Customer's exclusive remedy in the event of any material and continuing 
nonconformity, defect, or error in the information service shall be to take reasonable corrective 
actions upon discovery of the problem. 

 
 

 

Page 29 

 

 

 

 

Содержание Aqua Trac Pro

































Отзывы: