Installation, Operation & Maintenance Parksafe Gas Detector
Rev: 11 0421
12
Installation Details
Please pass this manual to the system owner / user.
Date of Installation:
Installation Location:
Organisation:
Stamp/Signature of the installer:
We recommend all AGS gas detection equipment be commissioned by competent/trained engineers to ensure correct
installation and operation. The Merlin range of gas detectors are calibrated when manufactured, however, we strongly
recommend the detectors response and alarm signals are tested and validated once installed. This will ensure the
equipment performs as intended and is free from any unforeseen damage caused by transit/installation.
Every effort is made to ensure the accuracy of this document; however, AGS can assume no responsibility for any errors or
omissions in this document or their consequences. AGS would greatly appreciate being informed of any errors or omissions
that may be found in the content of this document. For information not covered in this document, or if there is a requirement
to send comments/corrections, please contact AGS using the contact details given below.
American Gas Safety LLC
Head office:
6304 Benjamin Road, Suite 502, Tampa, FL 33634
Tel: (727) 608-4375
[email protected]
American Gas Safety LLC is the owner of this document and reserves all rights of modification without prior notice.
