© 2013 Agrowtek Inc.
www.agrowtek.com
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | [email protected]
11
Controls Functions
“Controls” are functions such as thermostats, timers, etc. that the controller uses to operate the “outputs” (greenhouse
equipment.) The grower decides which of the controls functions the controller will use to control the equipment in the
environment(s.)
Any control function that is used must be assigned to an output or VSC channel #.
Any control function can be disabled by setting the output number (and VSC channel) to 0.
Multiple controls functions can be assigned to the same output.
For example; a cooling thermostat and a de-humidistat can both be assigned to an output connected to a ventilation fan in
order to turn the fan on for either high temperature or high humidity.
Controls functions can be assigned to a zone.
The controller can monitor up to two sensor zones and the control you set up needs to know if it should respond to the sensor
readings for zone 1 or zone 2. (A zone number of 0 defaults to zone 1.)
Touch Panel
The controls functions are accessed via the main menu.
Software
The controls functions are accessed on the “Controls” tab page when connected to a controller. Click on the controls buttons to
modify the settings.
Active controls are highlighted with their respective function color.
Clicking on a control button will display the settings for that control function.
Press “Menu” button to enter main
menu.
Press “Controls” to enter controls menu.
Controls are broken down into basic
categories. Press “Next” to access
additional controls.
