3
USER INFORMATION
It is IMPORTANT that all operators make themselves familiar with the unit and must read
this OPERATORS MANUAL and SAFETY INSTRUCTIONS attentively.
GETTING STARTED
Your Cereal Mixer Bucket will be fitted and delivered with the correct brackets
to suit the fork-lift/loader it is intended to fit. SEE BOLT ON BRACKETING
INSTRUCTIONS AND BOLT SPECIFICATIONS SECTION FOR FULL INFORMATION. If for
any reason the fittings are lost or damaged, or if the bracketing is removed for
any reason, please refer back to this information in order to refit the brackets
and/or replace any lost fittings with the correct specification.
Please see SPOUT
FITTING INSTRUCTIONS on page 4 before starting use!
Your Cereal Mixer Bucket will also be fitted with the correctly swaged hydraulic pipes
and fittings applicable to your forklift/loader as per your request. If these pipes are
damaged they must be replaced immediately with NEW pipes and fittings.
DO NOT ATTEMPT TO REPAIR HYDRAULIC PIPES OR ALLOW ANY ONE ELSE TO REPAIR THEM.
Any replacements can be ordered from us and sent to you overnight if required.
Your Cereal Mixer Bucket requires basic mechanical attention. Please refer to the
MAINTENANCE SECTION of this manual.
WEIGHTS
5’
Wide /1.4m3 Model
625Kg including brackets
6’6”
Wide /1.7m³ Model
790kgs including brackets
Your Cereal Mixer Bucket is not to be used for any other purpose than for which it is
intended
–
Primarily that is the collection, mixing and discharge of Cereal type feed
and feed including minerals, nuts, and molasses.
For 2020 models, a larger diameter, substantially constructed discharge chutes allows
user to mix a percentage* of dry, PC maize, straw or grass silage to their cereals.
*Percentage is variable and limited to the properties for each feed. Factors include moisture content and
product quality. Main feed percentage is required to be cereal, concentrate and nut type feed.