37
3.2.6.
Lighting system
Always check that your lighting system is in full working order, clean and operational before driving on
the road.
Never set out on the public highway if one of these elements
is not operating correctly.
Replacing bulbs:
1. Disconnect the lighting board
2. Unscrew the protective glass.
3. Remove the faulty bulb.
4. Fit the replacement bulb (ensure voltage and amperage are correct).
5. Refit the protective glass and screw up.
THE LIGHTING IS REMOVABLE, IT IS ESSENTIAL TO REMOVE IT
BEFORE WORKING.
It is essential to remove the lighting board when using the CULTIPLOW in the field.
As the lighting board is designed solely for transport, AGRISEM INTERNATIONAL cannot be held
liable if the lighting board breaks due to being used during work.
Using the CULTIPLOW correctly ensures crops are sown safely under optimum conditions. It is the
user's responsibility to decide and assume sole responsibility for all risks linked to incorrect use or
inappropriate use of the CULTIPLOW.
AGRISEM INTERNATIONAL cannot be held liable under any circumstances in the event of soil
damage and a result which does not correspond to the intended aim where the usage and safety
instructions have not been complied with.
