Putting into operation :
•
In order to respect the parallelogram effect, ensure that the distances
AA
’ and
BB
’ are equal.
•
With adjusting of the stop axle
C
you
can control the working depth.
So, higher you place the stop
axle
C
, more deeply you work with
Combiplow 31+.
•
The adjustment of the stop axle
D
is needed to control the total compactness. That why the
maximal compactness is achieved when you put the stop axle
D
in the highest position.
V – Adjustment
1. Working width of an element (see page 16) :
-
Adjust the distance between each pair of blades if you like it by moving their support along the
frame.
2. Depth adjustment :
-
Put the elements in their working position.
-
Adjust the depth by manipulating the depth control handle or the shafts of the multistop braces
when your machine is equipped with a roller.
VI – Maintenance/repair
1. Before beginning any maintenance operation or oiling, make sure that the safety instructions have
been followed. Before adjustments or verification, make sure the COMBIPLOW 31+
is horizontal
and stable. Block the machine if necessary.
12
