Beware ! The hydraulic circuit is under pressure
.
1. When assembling the jacks and hydraulic devices take care to connect up the circuit correctly
as indicated in the manufacturer’s instructions.
2. Before connecting a hose to the hydraulic circuit of the tractor ensure that the tractor’s circuits
and those of the COMBIPLOW 31+ are perfectly clean and not under pressure.
3. Regularly verify the hydraulic hoses ! The damaged and worn hoses must be replaced
immediately.
When replacing the hydraulic hoses only use those with the characteristics and quality as
recommended by the manufacturer of the machine.
4. If a leak is discovered you must take all necessary precautions to avoid accidents.
5.
All liquid beeing under pressure
, particularly the oil in the hydraulic circuit can penetrate the
skin a cause serious injury!
In case of injury see your docotr immediately, there is a risk of infection!
6.
Before any operation on the hydraulic circuit, lower the machine, cut the pressure in the
circuit, stop the motor and remove the key from the ignition
.
9
