Agrimate AM-708T, Руководство пользователя

Страница: 22 / 38

22
• Turn the idling adjustment screw:
- counter-clockwise to reduce engine speed
- clockwise to increase engine speed

NOTE
• Warm up the engine before adjusting the idling speed.
• Throttle wire play
Throttle wire play should be 1 to 2 mm. After completely returning the throttle lever, take the
throttle wire at the carburetor end in your fingers and give a light tug. If the play is too great or
too small, readjust the position of the wire retaining nut. Loosen the lock nut and turn the wire
retaining nut clockwise (screw in) to increase the play and counter-clockwise (unscrew) to reduce
it. After adjusting, please fasten the wire retaining nut by tightening the lock nut.
a. lock nut
b. wire retaining nut
c. wire sleeve
MUFFLER

WARNING
• Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of ex-
haust leakage is found, stop using the machine and have it repaired immediately.
• Note that failing to do so may result in the engine catching on fire.
PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE
1. Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup.
Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the
same time.
2. Tighten all screws, bolts, and fittings.
3. Check to see if any oil or grease has worked its way in between the clutch lining and drum, and
if it has, wipe it away using oil-free, lead-free gasoline.