Agriframes, Journal house, Hartcliffe Way, Bristol, BS3 5RJ
Orderline: 0117 934 1790 Fax: 0117 934 17 91
Order on-line: www.agriframes.co.uk
*If the lattice option has been chosen you will need to follow the spacing guide for the
lattice, to ensure that the lattice fits into the spaces.
Slide 2 Spacer Bars with Ring Clamps onto each pair of uprights, tightening the grub screws
once the Spacer Bars as positioned as illustrated in Figure 6.
The lower Spacer Bars should be positioned 9 inches from ground level (once the
uprights have been inserted)
Position the Second Spacer Bar 40 inches above the lower Spacer Bar.
Also check the positioning of the Spacer
Bars on the Gazebo top, as shown in
Figure 6.
Step 7:
Lift the constructed Gazebo top onto
the uprights, then cover the joins with
moisture seals.
You will need at least 2 people
for this step due to the weight of
the Gazebo top.
Step 8:
Reposition the Stafford Curves
Loosen the Parallel Clamp Joint, lower the Stafford Curves until the Parallel Clamp
sits 2 inches below the join between the Upright and the full curve.
Move the Parallel Clamp position of the Stafford Curve, until the Parallel Clamp holds
the Stafford curve approximately 2 inches from the end of the curve.
If you have any questions regarding assembly please call our customer service team on 0117 934 1790
Figure 6: Round Gazebo Spacer Bar Distances
