5 Maintenance and Repair
Remote-controlled High Grass Rotary Mulcher
agria 9600-112
63
Check blade drive V-belt
Make sure that the ignition is switched off. The V-
belt is located in the mowing deck and can be ac-
cessed by opening the covers under the fuel
cans.
Check the V-belt tension every
25 hours of
operation
.
Correct V-belt tension:
The V-belt gives way by approximately 15 to 20
mm when you press your thumb on it.
Adjustment and belt replacement should be car-
ried out by a specialist workshop or
- agria-Service -
To tension the V-belt, proceed as follows:
1. Ensure correct seating of the V-belt as shown
in the figure.
2. Tighten the V-belt with tension nut (1) size 24.
3. Make sure that the tension spring (2) is under
tension but not tightened on the block.
Check the V-belt for wear and damage.
Replace the V-belt if it is damaged.
Replacement of the belt should only be carried
out by a specialist workshop or
- agria-Service -
.
Содержание 9600-112
