1 Safety Instructions
12
Remote-controlled High Grass Rotary Mulcher
agria 9600-112
or other objects and injuries to bystand-
ers.
Work across the slope along the contour
line and in an upwards direction when
turning, if possible.
Watch out for holes, furrows, elevations
and other objects, to prevent slipping or
tipping over.
Bear in mind that high grass can conceal
obstacles, hazards and small animals.
Avoid working on wet ground in steep ter-
rain. Special care should be taken in the
area of ditches and river banks.
Additional safety instructions for chil-
dren and animals
Children can easily mistake this appli-
ance for a toy. Therefore, never leave the
machine or the remote control unat-
tended.
Bear in mind that children and ani-
mals may appear in places where you
don't expect them. Be particularly careful
when approaching areas that are not
open to view, bushes, trees or other ob-
jects, which could obstruct your view of
children or animals.
Finishing work
Never leave the machine unsupervised
while the engine is running.
Switch the engine off before leaving
the machine. Then close the fuel tap(s) (if
available).
Take care not to park the hot machine in
the blazing sun.
To protect against unauthorized use, re-
move the keys from the remote control
and protect the machine against rolling
away.
Maintenance
Only trained specialist personnel, who
can carry out professional maintenance
and repair, may carry out this work.
Do not carry out maintenance and clean-
ing with the engine running.
When working on the engine always re-
move the ignition key (if present) and also
the spark plug connector in the case of
petrol engines.
Protective devices and tools that are sub-
ject to wear and tear must be regularly in-
spected and replaced if necessary!
Damaged cutting tools must be replaced!
When replacing cutting tools use suitable
tools and protective gloves.
Do not carry out repairs such as welding,
grinding or sharpening, drilling etc. on
structural, safety-relevant parts!
Disconnect the battery before commenc-
ing welding work.
During welding work, make sure that the
electrical and electronic components of
the machines are not influenced.
Keep the machine and attachments
clean, to avoid the risk of fire.
Regularly check nuts and bolts for tight-
ness and retighten if necessary.
After maintenance and cleaning, ensure
that the protective devices are re-in-
stalled and properly adjusted!
Only use genuine Agria spare parts.
Carry out a functional and safety test after
completing the work.
Storage
Never store the machine in rooms with
open heating.
Do not park the machine in closed rooms
with fuel left in the tank. Fuel vapours are
hazardous.
Содержание 9600-112
