26
Brush Cutter 4500 Hydro
Starting the Engine
Wear individual protective ear plugs and solid
shoes!
Mount spark plug connector
Open fuel tap
(only version 71 cm)
Set the engine shut-off switch to operating
position
(only version 85 cm)
Set driving speed to position neutral "0"
Set mulching drive to " 0"
Set both steering levers to "park brake" and
lock
I
The engine can only be started if the
driving switch and mulching drive is
set to "0" and both steering levers are set
to "park brake" and are locked into place!
-Safety circuit!
Cold engine: set speed adjusting lever to max
and put CHOKE to “CHOKE” position
Warm engine: Set speed control lever to max
Start the engine with the recoil starter
Once the engine has started, let it warm up
for some time. Slowly push choke back into
operating position.
4. Commissioning and Operation
max
0
