36
Brush Cutter 4500 Hydro
5. Maintenance
Lubricating points
Lubricate at the lubricating nipples
-
after
each 100 operating hours or least once per
year and after cleaning with a high-pressure
cleaner.
Knife shaft bearing
Idler arm
on either side front frame bearing
on either side rocker bearing of the front
wheels
on either side locking bolts of the front
wheels
Drive-Wheels
l
When commissioning the tool carrier and
each time you change wheels, check and
tighten wheel screws after the first 2 operating
hours with 100 Nm. Proceed likewise when
doing maintenance work.
l
Check tyre air pressure regularly. For smooth
driving, make sure that there is the same pres-
sure in front and rear tyres respectively.
6
6
6
6
6
B; J
100 Nm
6
6
6
6
6
2 h
