Agri-Fab VAC-N-GO 45-0407-131, Руководство пользователя

Страница: 13 / 24

13
1/4" x 1" HEX BOLT
1/4" FLAT WASHER
NYLON WASHER
1/4" NYLOCK NUT
MOUNTING STRAP
BOLT THIS END OF
STRAP TO 5/16" BOLT
ON MOWER DECK
38"/40" TEMPLATE
CUT OUT SLOT IN TOP
OF DECK ADAPTER
TEMPLATE TO CUT OUT SLOT
11. Cut out two templates and place on deck adapter as
shown in fi gure 19. Tape smaller one on top and larger
one on the side and bottom. After they are in place,
carefully mark around the templates, then cut out adapter
to obtain correct opening.
12. Bolt end of mounting strap to the 5/16" bolt on the mower
deck. The other end of the strap will bolt to a hole in
the deck adapter, which must be drilled. Position the
adapter on the deck, then drill a 5/16" hole in the bottom
of the adapter that will align with the hole in the strap.
Fasten the adapter to the strap using one 1/4" x 1" hex
bolt, 1/4" fl at washer, nylon washer and 1/4" nylock nut.
See fi gure 19.
FOR 1990 AND NEWER MURRAY TRACTORS WITH
A 38" OR 40" DECK
13. Assemble end of hose and hose clamp over the round
opening of deck adapter and tighten clamp.
GO DIRECTLY TO OPERATION INSTRUCTIONS
WHICH ARE LOCATED ON PAGE 14.
FIGURE 19
14. Tape 46" template onto deck adapter. Mark and then
cut out adapter.
15. Fasten the angle bracket and the mounting bracket to
the mower deck as shown in fi gure 20. Use two 5/16"
x 1" carriage bolts, 5/16" fl at washers and 5/16" nylock
nuts. The bolt heads go on inside of mower deck.
16. Drill two 5/16" diameter holes in the deck adapter that
will align with the holes in the angle bracket and the
mounting bracket. Assemble the deck adapter to both
brackets using two 1/4" x 1" hex bolts, 1/4" fl at washers,
nylon washers and 1/4" nylock nuts. See fi gure 20.
17. Assemble end of hose and hose clamp over the round
opening of deck adapter and tighten clamp.
GO DIRECTLY TO OPERATION INSTRUCTIONS ON
PAGE 14.
FOR 1990 AND NEWER MURRAY TRACTORS
WITH A 46" DECK
1/4" NYLOCK NUT
ANGLE BRACKET
NYLON WASHER
LOCATE AND
DRILL HOLES
1/4" x 1"
HEX BOLT
1/4" x 1" HEX BOLT
NYLON WASHER
1/4" FLAT WASHER
NYLON WASHER
1/4" FLAT WASHER
MOUNTING
BRACKET
MOUNTING
BRACKET
1/4" FLAT
WASHER 1/4" FLAT
WASHER
FIGURE 20