4
10. Place one side panel in position against a side angle
and down on top of the front panel. Start one M6 x 5
screw through the
center hole
in side panel and side
angle. Secure with hex nut and flat washer. See figure
7.
Make only finger tight at this time.
11. Start one M6 x 5 screw through front hole on side panel
and side angle. Start another M6 x 5 screw through
top hole on side panel and front angle assembly. Next,
place a support strap over these two screws and secure
it with flat washers and hex nuts,
making only finger
tight at this time. See figure 7.
1. Repeat steps 10 and 11 for the other side panel.
13. Assemble one M6 x 5 screw through bottom hole in
side panel and front angle assembly. Secure with a flat
washer and hex nut,
making only finger tight at this
time. Repeat for the other side panel. See figure 8.
14.
Tighten all loose nuts and screws securely at this
time.
FIGURE 8
FIGURE 7
ENGLISH
FRONT
ANGLE
ASS'Y
FRONT
PANEL
SUPPORT
STRAP
M6X25
SCREW
M6X25
SCREW
M6
HEX
NUT
M6
HEX
NUT
M6X25
SCREW
Ф6
FLAT
WASHER
Ф6
FLAT
WASHER
SIDE
PANEL
FRONT
ANGLE
ASS'Y
M6X25
SCREW
FRONT
PANEL
M6
HEX
NUT
Ф6
FLAT
WASHER
SIDE
PANEL