AGRI EASE BE-BX42S Скачать руководство пользователя страница 35

Страница: 35 / 46

BE-BX42S / BE-WC62G USER MANUAL

HYDRAULIC FEED CONTROL

The machine with the hydraulic feed hopper is designed with a control lever to place the hopper in:
• FEED
• OFF/ NEUTRAL
• REVERSE.

Pull it all the way out to feed, push in to the first detent for off or neutral and fully in for reverse. In reverse

the material in the hopper is pulled out of the rotor. Use reverse when rotor is overloaded, jammed or

plugged.

IMPORTANT

Check the function of the control lever when attaching the hydraulic lines to the tractor.
The hopper must feed in when the lever is moved out. If it does not, reverse the hoses. The control lever

must function like the drawing on each side of the hopper or the hoses must be reversed.

Use the flow divider valve to set the speed of the feed hopper. Use the quality of the job being done to

establish the required feed speed. Increase the speed when chipping brush or twigs. Decrease the speed

when clipping hard, solid material or when the engine is being pulled down.

Z940

Z940 4444

Z940

Left Side

RightS ide

Control Schematic

Содержание BE-BX42S















































Результаты поиска

Содержание BE-BX42S

Отзывы:

Бренды по названию

Популярные бренды

AGRI EASE BE-BX42S, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание BE-BX42S

Отзывы:

Бренды по названию

Популярные бренды