28
BE-BX42S / BE-WC62G USER MANUAL
EMERGENCY STOPPING
Stop tractor engine if an emergency occurs. Correct emergency situation before starting engine and
resuming work.
Feeding - Manual Feed
• Slowly slide the wooden material into the feed hopper and move it into the rotor.
• Do not push the material too fast or with a lot of force into the rotor. Stop and slow down if the engine
starts to slow down.
• Do not reach into the feed hopper further than the curtain to be sure not to contact the blades on the
rotor.
• Use a stick or branch to push any piece of material into the rotor that does not move on its own and stops
in the hopper. Do not take a chance with getting your hand caught in the rotor.
Feeding - Hydraulic Feed
• Slowly slide the wooden material into the feed hopper and move it into the rotor.
• Use the flow divider on the side of the feed hopper to set the feeding speed.
• Do not reach into the feed hopper further than the curtain to be sure not to contact the blades on the
rotor.
• Use a stick or branch to push any piece of material into the rotor that does not move on its own and stops
in the hopper. Do not take a chance with getting your hand caught in the feed roller.
Always wear personal protective equipment whenever operating the machine. This includes but is not
limited to protective shoes with slip resistant soles, protective goggles or face shield, heavy gloves, hearing
protection and protective clothing.
Do not place metal, bottles, cans, rocks, glass or other material into the wood chipper. If something like this
gets into the machine, stop the machine immediately for a detailed inspection. Stop engine, remove ignition
key, place in your pocket and wait for all moving parts to come to a stop before inspecting or unplugging.
Inspect machine for damaged or loosened parts before resuming work.
DANGER
ROTATING
CUTTING BLADES
ROTATING
CUTTING BLADES
Keep hands and feet out of inlet
and discharge openings while
machine is operating to avoid
serious personal injury. Stop
engine, remove spark plug wire
and allow machine to come to a
complete stop before clearing
obstructions or making adjustments.
Z9400
EMERGENCY STOPPING
BE-BX42S / BE-WC62G
Emergency Stopping
Stop tractor engine if an emergency occurs. Correct emergency situation before starting engine and
resuming work.
Feeding - Manual Feed
• Slowly slide the wooden material into the feed hopper
and move it into the rotor.
• Do not push the material too fast or with a lot of force
into the rotor. Stop and slow down if the engine starts
to slow down.
• Do not reach into the feed hopper further than the
curtain to be sure not to contact the blades on
the rotor.
• Use a stick or branch to push any piece of material into
the rotor that does not move on its own and stops in
the hopper. Do not take a chance with getting your
hand caught in the rotor.
Feeding - Hydraulic Feed
• Slowly slide the wooden material into the feed hopper
and move it into the rotor.
• Use the flow divider on the side of the feed hopper to
to set the feeding speed.
• Do not reach into the feed hopper further than the
curtain to be sure not to contact the blades on
the rotor.
• Use a stick or branch to push any piece of material into
the rotor that does not move on its own and stops in
the hopper. Do not take a chance with getting your
hand caught in the feed roller.
Always wear personal protective equipment whenever operating the machine. This includes but is not limited
to protective shoes with slip resistant soles, protective goggles or face shield, heavy gloves, hearing protection
and protective clothing.
Do not place metal, bottles, cans, rocks, glass or other material into the wood chipper. If something like this
gets into the machine, stop the machine immediately for a detailed inspection. Stop engine, remove ignition
key, place in your pocket and wait for all moving parts to come to a stop before inspecting or unplugging.
Inspect machine for damaged or loosened parts before resuming work.
Fig. 25
DANGER
ROTATING
CUTTING BLADES
ROTATING
CUTTING BLADES
Keep hands and feet out of inlet
and discharge openings while
machine is operating to avoid
serious personal injury. Stop
engine, remove spark plug wire
and allow machine to come to a
complete stop before clearing
obstructions or making adjustments.
Z9400
