AGP 1100W Electric Beveler model B16, Инструкция по эксплуатации

Страница: 11 / 24

STARTING AND STOPPING TOOL
Make sure that the power circuit voltage is t
h e s a m e a s t h a t s h o w n o n t h e
specification plate of the machine and
that switch is “OFF” before connecting the
tool to the power circuit.
Switching the machine on and off
To switch on:
Press the trigger switch to start.
To lock the switch on, press the lock pin
next to the switch.
Lock Botton
On/off trigg
For 1800W mode :
Lock Botton
On/off trigger
To switch off:
Squeeze and release the trigger switch to
unlock the switch and switch off.
After the machine has been switched off,
the arbor will still rotate for a time. Take
care that parts of your body do not come
into contact with the rotating parts or set
the machine down while it is still rotating!
For 1100W Electric Beveler AC
Induction Motor Mode
Note: For your own safety!Always wear
goggle and take precautions before
operating the beveler. Make sure fully
understanding and compliance to the
safety rules before use.
1. Press green motor on button to start
motor. Use the handle to feed the
machine to the desired working angle
to work. Always use very light pressure
when beginning the cutting.
2. To switch off the beveler, press the red
motor off button.
WARNING! Always switch off the beveler
and unplug the plug from the mains
immediately after use, in order to prevent
being operated by untrained personnel or
accidents.
12