02
03
04
Cut the railing part
D
from frame
60-02
.
Note the position of the sloping corner of
the railing (circled). Apply a little
superglue to the three pegs at the
bottom of the railing and fit them into
the holes in the platform part
A
. Bend
the two short edges of the platform up
at right angles (arrows).
Take the superstructure assembly and
identify the rear of the admiral’s bridge,
part
43-01
. Apply a little superglue to
the two short edges of the platform
(bent upwards in step 2) and fit them
into the recesses on the underside of
the admiral’s bridge.
Cut parts
B
and
C
from frame
60-02
.
Position part
B
on the platform as
shown, and hold it in place. Check the fit
of part
C
, positioning it as shown so that
it will hold part
B
in place. Apply a little
superglue to the ends of part
C
and glue
it in place, with the top struts against the
admiral’s bridge and the bottom peg
fitting into the slot in platform part
A
.
43-01
D
A
A
C
B
A
43-01
14
14
AGORA
MODELS
15
AGORA
MODELS
