AGM AS 2520, Оригинальное руководство пользователя

Страница: 20 / 124

8
AGM AS 2520 (GB)

The appliance must not be used if damaged or safety equipment is defective.
Replace any worn-out and damaged parts.

Never remove the collection bag when the machine is being operated.

Never touch under the housing body when the engine is running.

The protective equipment on the appliance is strictly prohibited to be
disassembled, changed, used in conflict with the designation and it is prohibited
to attach any protective equipment of other manufacturers.

Keep the power source free of debris and other build-ups to prevent damaging
it or a possible fire.

Stop the device and disconnect it from the power supply.

Wait until all rotating parts have stopped and the appliance has cooled down.
Stop the device and disconnect it from the power supply. Wait until all rotating
parts have stopped and the appliance has cooled down.

Whenever you leave the unit.

Before removing blockages.

Before checking, cleaning or working on the device.

After contact with a foreign object, to check the device for damage.

Before freeing the device from accumulated material.

Before tilting or transporting the device.
When working with this machine, do not use spare parts other than those
recommended by us. Using spare parts not recommend by us can result in serious
injuries to persons or damage to the machine.
! DANGER
Appliances used at many different locations including wet room and open air must
be connected via a residual current device (FI, RCD, PRCD) of 30mA or less.
Before use check machine, cable, and plug for any damages or material fatigue.
Repairs should only be carried out by authorized service agents.
Insert the plug of the electrical cable in a socket of suitable shape, voltage and
frequency complying with current regulations.
Keep the connection and extension cables away from dangerous moving parts to
avoid damaging them.
Only use splash proof extension cables approved for outdoor purposes. The
stranded wire cross-sectional area of the extension cable must be at least 1.5 mm²
for cables up to 25 m and 2.5 mm² for cables above 25 m.
Make sure the machine is switched off before plugging in. The device is only
intended for use on premises that have a continuous current carrying capacity of