RATTLER TC
USER MANUAL
19
NOTE:
When the power is less than 15%, the Wi-Fi hotspot function will be turned off
automatically.
2.2.7 PICTURE IN PICTURE MODE
1. Hold
button to show the menu.
2. Select
PIP menu item and enter PIP mode. The details show in the upper
left corner.
3. Press
button to switch the PIP type. Upper Left, Upper Middle, Upper
Right, and OFF are selectable.
NOTE:
When you select Upper Right as PIP type, the OSD will be blocked.
4. Hold
button to exit.
NOTE:
The PIP view is the detail of central part.
If digital zoom is enabled, the PIP view also zooms. If the digital zoom ratio
exceeds 4, the PIP does not zoom.
2.2.8 ELECTRONIC ACCURACY CORRECTION
After mounting of clip-on to the weapon with day scope the clip-on optical axis
can be offset off scope optical axis. The Image Calibration function supports
manually adjusting the position of the live preview window by pressing the
buttons up, down, left, and right. The image region could be adjusted in 4
directions in the whole OLED screen area.
Adjust the electronic accuracy correction as follows:
1. Aim your day scope to the middle of target and shoot. This action will test the
control of day scope accuracy.
2. Mount the Rattler TC on the day scope. Aim at the center of the target and
shoot again.
3. Press
and
buttons together in the view mode to display the Image
Calibration menu.
FIGURE 2-10. IMAGE CORRECTION
X=0, Y=0
X=+68, Y=+58
