We strongly suggest removing the fin
when transporting the board to
prevent damage. Always screw the screw
tightly back into the metal plate on the fin
box to prevent the plate from falling out.
Rinse your board with fresh water
after every use to remove dirt, sand, and
salt residue. Pull apart paddle shaft pieces
after each use and rinse with fresh water.
Let dry and leave apart until next use.
Store your board away from direct
sunlight, in a cool, dry location.
If your board has a hole or scratch in
the foam surface, you can purchase any
“Non-Solvent” based glue to repair it.
Spread the glue inside the hole or scratch
and let dry before using. We recommend
using 3M 5200 marine sealant or
Gorilla Glue which can be purchased at
most hardware or drug stores.
LEG LEASH x1
FIN x1
RECOMMEND USER WEIGHT LIMIT NOT
TO EXCEED 120 LBS.
You can also use any “Non Solvent” based
glue to repair side rail seams (where the
slick bottom and foam surface join
together). Before application, test glue on
inconspicuous part of the board. Spread
the glue in seam and let dry before using
the board.
The boards may be slippery when they are
new, if so you can always rub some wet sand
on the deck of the board.
Fins, Leashes and Paddles are available
for purchase.
Please call 1-877-673-3622
for more information or visit www.
agit-global.com
1
2
3
4
5
6
7
ADJUSTABLE PADDLE x1
Содержание Wavestorm Junior Stand-Up Paddle Board
Страница 1: ......
