AgileX Robotics (Dongguan) Co.,Ltd.
3
0. Safety at a Glance
1. Environmental Considerations
For remote control operation, select a relatively open area to use
SCOUT 2.0
,
because
SCOUT 2.0
is not equipped with any automatic obstacle avoidance sensor.
Use
SCOUT 2.0
always under
-20
℃
~45
℃
ambient temperature.
If
SCOUT 2.0
is not configured with separate custom IP protection, its
water and dust protection
will be IP22
ONLY
.
2. Pre-work Checklist
Make sure each device has
sufficient power.
Make sure
SCOUT 2.0 does not have any obvious defects.
Check
if the remote controller battery has sufficient power.
When using, make sure
the emergency stop switch has been released.
3. Operation
In remote control operation, make sure the area around is
relatively spacious
.
Carry out
remote control within the range of visibility
.
As the maximum
load
of
SCOUT 2.0
is 50 kg
, when using, make sure
the effective load does
not exceed 50 kg.
When SCOUT 2.0 is installed with external expansion, verify the barycenter location of the
expansion and make sure is located in the
rotation center
.
When SCOUT 2.0
has low power alarm, charge it in time.
When SCOUT 2.0
has a defect, please immediately stop using it to avoid secondary damage.
When SCOUT 2.0 has had a defect,
please contact the relevant technician to deal with it, do
not handle the defect by yourself.
Always use SCOUT 2.0
in the environment with the protection level required for the
equipment
.
Do not push SCOUT 2.0 directly.
When charging, make sure the ambient
temperature is above 0
℃
.
If SCOUT 2.0 shakes in in-place rotation, adjust the suspension.
4. Maintenance
Regularly check the tire pressure, and make sure it is within
1.8 bar~2.0 bar.
