manualshive.com logo in svg

Agilent Technologies U9391C, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Agilent Technologies U9391C Скачать руководство пользователя страница 3

Agilent U9391C/F Comb Generator Operating and Service Manual  

3

Certification

Agilent Technologies certifies that this product met its 
published specifications at the time of shipment from the 
factory. Agilent Technologies further certifies that its 
calibration measurements are traceable to the United States 
National Institute of Standards and Technology (NIST, formerly 
NBS), to the extend allowed by the Institute’s calibration 
facility, and to the calibration facilities of the other 
International Standards Organization members.

WEEE Compliance

This product complies with the WEEE Directive (2002/96/EC) 
marking requirements. The affixed label indicates that you must 
not discard this electrical/electronic product in domestic 
household waste.

Product Category: With reference to the equipment types in the 
WEEE Directive Annex I, this product is classed as a 
"Monitoring and Control Instrumentation" product.

Do not dispose in domestic household waste.

To return unwanted products, contact your local Agilent office, 
or see www.agilent.com for more information.

Содержание U9391C








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды