Agilent Technologies TPS-mobile 9698403, Руководство пользователя

Страница: 383 / 400

Technical Information
Letter Protocol Description
17
TPS-mobile User Manual / 87-901-005-01 (F) 383/400
Window Meanings
N. Read/
Write Data
Type Description Admitted Values
000 R/W L Start/Stop (in remote/ Front mode the
window is a read only) Start = 1
Stop = 0
001 R/W L Low Speed Activation No = 0
Yes = 1 (default = 0)
008 R/W L Remote (default) or Serial configuration Remote = 1
Serial = 0 (default = 1)
100 R/W L Soft Start (write only in Stop condition) YES = 1
NO = 0
101 R/W N R1 Set Point type 0 = Frequency
1 = Power
2 = Time
3 = Normal
4 =Pressure (default = 3)
102 R/W N R1 Set Point valve (expressed in Hz, W or s) (default = 900)
103 R/W N Set Point delay: time between the pump
start and the set point check (seconds) 0 to 99999 (default = 0)
104 R/W L Set Point signal activation type: the signal
can be "high level active" or "low level
active" 0 = high level active
1 = low level active
(default = 0)
105 R/W N Set point hysteresis (in % of value) 0 to 100 (default = 2)
107 R/W L Active Stop (write only in stop) 0 = NO
1 = YES
108 R/W N Baud rate 600 = 0
1200 = 1
2400 = 2
4800 = 3
9600 = 4
(default = 4)
109 W L Pump life/ cycle time/ cycle number reset To reset write ‘1’
110 R/W L Interlock type (default = 1) Impulse = 0
Continuous = 1