Agilent Technologies HP 82335 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 54

Agilent Technologies HP 82335 Скачать руководство пользователя страница 15

Introduction

Radio and Television Interference

Radio and Television Interference

This device has been verified to comply with Fee Rules Part

15.

Operation

is subject to these two conditions:

I.

this device may not cause radio interference, and

2. this device must accept any interierence received (including interierence

that may cause undesired operation).

This equipment generates and uses radio frequency energy. If not installed

and used in accordance with this manual, it can cause interference to radio
and television communications. The rules with which it must comply afford
reasonable protection against such interierence when it is used in most
locations. However, there can be no guarantee that such interference will not

occur in a particular installation. If you think your computer is causing

interference, turn off the system. If the radio or television reception does nO(
improve, your computer is probably not causing the interference.

If

your computer does cause interference to radio and television reception,

you are encouraged to try to correct the interference by one or more of the
following measures:

•

Relocate the radio or TV antenna.

•

Move the computer away from the radio or television.

•

Plug the computer into a different electrical outlet, so that the computer
and the radio or television are on separate electrical circuits.

•

Make sure you use only shielded cables to connect peripherals to your

computer.

•

Consult your dealer, Hewlett-Packard Company, or an experienced radiol

television technician for other suggestions.

•

Order the FCe booklet

How to Identify and Resolve Radio-TV

Inteiference Problems

from the U

.

S

.

Government Printing Office,

Washington,

D.e.

20402.

The stock number of this booklet is

004-000-

00345-4.

6

Chapter 1

«
...
13
14
15
16
17
...
»

Содержание HP 82335























































Отзывы:

Нет отзывов