Wireless Remote Base Unit for VS Series and G8610, G8611, or G8612 Series Leak Detectors
Page
11
of 14
Document No.
699910002
Revision
D
6) Mount the printed circuit board to the four posts, noting the correct orientation. Fasten with screws (Figure 3. Base
Board Assembly with Posts).
Figure 3: Base Board Assembly with Posts
7) Using the provided washer and nut, hand tighten the antenna to the outside of the leak detector wall, and then
apply a ½ turn using an adjustable wrench (Figure 4: Wireless Antenna).
Figure 4: Wireless Antenna
O-ring on Outside (Not Shown)
Washer
Nut
