Agilent Technologies G4565A, Руководство по установке аксессуаров

Страница: 8 / 18

8 G4565A Cooling Plate Accessory Installation Guide
Agilent 7697A Headspace Sampler
2
Install the secondary drip tray on the right side of the base plate.
Align the hole in the base plate with the knob on the secondary drip
tray (
Figure 9 ).
3
On the underside of the cooling plate assembly, check that all plastic
wrapping is intact, especially for the three LED electronics boards on
the underside of the front edge (see
Figure 10 ).
Figure 9 Install the secondary drip tray
Secondary drip tray
Base plate hole
Knob
C A U T I O N
Moisture-sensitive components on the cooling plate assembly are wrapped in
plastic. Do not remove the wrapping. Removing the wrapping will result in
premature failure of the electronic components.
Figure 10 Plastic wrapping covering the LED electronics board on underside of front edge
LED electronics board
Plastic wrapping