Agilent Technologies G3388B, Инструкции по эксплуатации, Страница: 6 / 20

6 G3388B Leak Detector
C A U T I O N C A U T I O N
• Do not expose the detector to shock, wet
environments, or solvents.
• Do not use the detector at temperatures outside
its specified operating range.
• Do not open the detector’s body.
• Do not use the detector to detect corrosive gases.
• Do not block the reference port (fresh air inlet) at
the top of the detector.
• The detector’s sensitivity will be adversely
affected if it is used in an area containing the
leaking gas.
• Detector sensitivity can be affected by wind.
• Do not use the detector’s micro USB cable for
other devices.
• During use, keep the detector temperature stable.
Do not use the detector while charging. Allow the
detector temperature to stabilize (cool) for 30
minutes after charging.
WA R N I N G
• Do not use the detector in areas at risk for fire,
explosion, or large leaks of flammable gas.
• When detecting small leaks of flammable
gases, make sure sufficient ventilation exists to
prevent a fire hazard.
• Do not use the detector in environments that
may be potentially contaminated with dust or
combustible fumes.
• Do not use the detector as safety equipment.
• This leak detector must not be used in Classified
(Hazardous) locations. Use of this leak detector
in a hazardous location could lead to personal
injury or death.
• The customer may not replace the battery. The
customer must return the leak detector to an
Authorized Agilent Repair Center for repair.