Multimode Source for 6410 Triple Quad LC/MS User Guide
27
Installation
2
To convert from ESI or APCI to the multimode source
Figure 15
Multimode spray shield
11
Screw the multimode spray shield into the holder for the spray shield. See
Figure 16
.
Figure 16
Multimode spray shield installed
12
Remove the shipping cover from the multimode source spray chamber.
Field shaping electrode 9
o'clock position
Field shaping electrode
6 o'clock position
N O T E
The field shaping electrodes should be in the nine o’clock and the six o’clock position.
Loosen the end plate screws on each side to adjust the field shaping electrodes position.