Agilent Technologies G1323A, Руководство пользователя, Страница: 41 / 170

1200 Series Handheld Control Module Users’s Guide 41
Working with the Control Module 2
Working with Methods
Working with Methods
A method contains a complete set of injection, separation and detection
parameters, including the timetable and injector program. Vial range
information is not part of the method.
There are two types of methods:
• The module method. The method parameters are stored in the individual
LC modules and not in the control module. A method that is stored in the
individual LC modules can be loaded, modified, saved and run from the
control module.
• The PC card method. The method parameters are stored on a PC card. A
method that is stored on the PC card can be loaded to the LC modules or
transferred to another LC system. Methods cannot be run directly from the
PC card. The method must first be loaded from the PC card before it can be
run. When the PC card method is loaded it becomes a module method.
Unless stated otherwise, the following sections refer to module methods.
Loading a Method
A method can be loaded using the Method button [F3] in the Analysis or
Samples screen:
1 Enter the Analysis or Samples screen.
2 Select Method ; the current parameters are displayed.
3 Press the Module button [ F1 ].
4 Select a method from the list.
5 Press Enter .
You can also load a method directly from the
Analysis
screen by using the
selection keys and changing the method in the method list.
The Method/Module screen lists all methods that are stored in the modules. For
each method there is a date when the method was last changed and a short
user description. When a method is loaded it becomes the current method.