Installation Note E8364-90012
15
Step 6. Lower and Fasten the Receiver Deck
Refer to
for this procedure.
1. Pull the latch pin (item
②
) toward the center of the analyzer to release the receiver deck.
2. Lift the receiver deck to partially lower it, then release the latch pin (item
②
). Lower the
receiver deck to its fully lowered position and ensure that the latch pin latches in the
lowered position.
3. With a T-10 TORX driver, install the four screws (item
①
) to secure the receiver deck.
Figure 9
Receiver Deck, Lowering
