Agilent Technologies E364XA Series, Руководство пользователя

Страница: 110 / 220

Chapter 4 Remote Interface Reference
Status Reporting Commands
109
4
STATus:QUEStionable:INSTrument:ISUMmary<n>[:EVENt]?
Return the value of the Questionable Instrument Isummary Event register for
a specific output of the two-output power supply. The particular output must
be specified by a numeric value. n is 1 or 2. ‘‘1’’ selects output1, and ‘‘2’’ selects
output2. The event register is a read-only register which holds (latches) all
events. Reading the Questionable Instrument Isummary Event register clears
it.
STATus:QUEStionable:INSTrument:ISUMmary<n>:CONDition?
Return the CV or CC condition of the specified instrument. If “2” is returned,
the queried instrument is in the CV operating mode. If “1” is returned, the
queried instrument is in the CC operating mode. If “0” is returned, the outputs
of the instrument are off or unregulated. If ‘3” is returned, the instrument is in
the hardware failure. n is 1, 2, or 3.
STATus:QUEStionable:INSTrument:ISUMmary<n>:ENABle
<enable
value>
Set the value of the Questionable Instrument Isummary Enable register for a
specific output of the two-output power supply. The particular output must be
specified by a numeric value. n is 1 or 2. ‘‘1’’ selects output1, and ‘‘2’’ selects
output2. This register is a mask for enabling specific bits from the Questionable
Instrument Isummary Event register to set the Instrument Summary bit (bit 1
and 2) of the Questionable Instrument register. These bits 1 and 2 are the logical
OR of all the Questionable Instrument Isummary Event register bits that are
enabled by the Questionable Instrument Isummary Enable register.
STATus:QUEStionable:INSTrument:ISUMmary<n>:ENABle?
This query returns the value of the Questionable Instrument Isummary Enable
register. n is 1 or 2.
*CLS
Clear all event registers and Status Byte register.
*ESE <enable value>
Enable bits in the Standard Event Enable register. The selected bits are then
reported to the Status Byte.
*ESE?
Query the Standard Event Enable register. The power supply returns a decimal
value which corresponds to the binary-weighted sum of all bits in the register.