Agilent Technologies DSO9024H, Руководство пользователя, Страница: 75 / 102

Using the Oscilloscope
75
To set the horizontal reference point
• Click one of the arrows at the bottom of the waveform display.
The selected horizontal reference is highlighted.
The vertical arrows at the bottom of the display correspond to the left, center,
and right horizontal reference points. This is the position of the trigger if the
horizontal position is set to zero delay. A non-zero horizontal position value
is the time relative to the trigger event at the selected horizontal reference
point.
Figure 3-19
Horizontal Reference Points
Click to set the
horizontal reference
to the left side of the
display
Click to set the
horizontal reference
to the center of the
display
Click to set the
horizontal reference
to the right side of
the display