Agilent Technologies DSO9024H Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 102

Agilent Technologies DSO9024H Скачать руководство пользователя страница 48

Using the Oscilloscope

48

To use the quick measurements

The action taken when the

[Multi Purpose]

key is pressed depends on the feature

selected in the Customize Multipurpose dialog box. The default feature is
QuickMeas (quick measurements), which is described as follows.

• To turn on the quick measurement display, press the

[Multi Purpose]

key.

The five preset measurements defined in the Quick Measurement
configuration are enabled and results are displayed on the screen for the first
waveform source. The default measurements are: V

p-p

, Period, Frequency, Rise

time, and Fall time.

• To measure parameters for another waveform, press the

[Multi Purpose]

key

until that waveform is the one shown in the measurement readout.
Continuing to press the

[Multi Purpose]

key cycles through each of the

waveforms available.

• To turn off the quick measurement display, press and release the

[Multi Purpose]

key until the measurements are turned off.

The measurement results disappear from the screen.

See the Infiniium application’s online help (described in Chapter 4) for
information on how to configure the quick measurement capability, using the
Customize Measurement feature of the graphical interface.

«
...
46
47
48
49
50
...
»

Содержание DSO9024H







































































































Отзывы:

Нет отзывов