Agilent Technologies Agilent 4396B, Руководство по программированию GPIB

Страница: 57 / 179

Or , you can return control to the external controller by resetting the GPIB as follows:
d a
ABORT 7 4
Return
5
Return Control (On External Controller)
This returns active control to the system controller .
Note
The PROGram subsystem commands in the following programs can be used
on the external controller . See the GPIB Command R eference manual for
additional information on the use of SCPI commands .
T o Execute an Instrument B ASIC Command from the External
Controller
Combine the PROG:EXEC command with Instrument B ASIC command to be executed. F or
example , to execute EDIT command,
d a
OUTPUT 717;"PROG:EXEC ""EDIT"""
Or you can change the double quoted term, ""EDIT"" to a single quote 'EDIT ', as follows .
d a
OUTPUT 717;"PROG:EXEC 'EDIT'"
Be careful when you execute an Instrument B ASIC command that requires a parameter . F or
example , to execute the Instrument B ASIC command \GET "FILENAME" ", the quotation is as
follows .
d a
OUTPUT 717;"PROG:EXEC ""GET """"FILENAME"""""""
Controlling Instrument BASIC from Remote 7-3