Agilent Technologies 85050B, Руководство пользователя и сервисное руководство

Страница: 27 / 56

85050B
Use, Maintenance, and Care of the Devices
Gaging Connectors
3- 7
Reading the Connector Gage
The gage dial is divided into increments of 0.0001 inch and major divisions of 0.001 inch (see Figure
3-2 ). For each revolution of the large dial, the smaller dial indicates a change of 0.01 inch. Use the
small dial as the indicator of multiples of 0.01 inch. In most connector measuring applications, this
value will be zero.
When making a measurement, the gage dial indicator will travel in one of two directions. If the
center conductor is recessed from the
zero reference plane, the indicator will move counterclockwise
to indicate the amount of recession , which is read as a negative value. If the center conductor
protrudes, the indicator will move clockwise to indicate the amount of protrusion , which is read as
a positive value. Refer to “Pin Depth” on page 2-3 for definitions of protrusion and recession.
Figure 3-2 Reading the Connector Gage