Agilent Technologies 83486A Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 90

Agilent Technologies 83486A Скачать руководство пользователя страница 25

2-2

Channel Setup Menu

Channel Setup Menu

Channel Setup Menu

This chapter describes the Channel Setup menu. A key tree and description of
the available functions is included.

C A U T I O N

The input circuits can be damaged by electrostatic discharge (ESD).
Therefore, avoid applying static discharges to the front-panel input connectors.
Before connecting any coaxial cable to the connectors, momentarily short the
center and outer conductors of the cable together. Avoid touching the front-
panel input connectors without first touching the frame of the instrument. Be
sure that the instrument is properly earth-grounded to prevent buildup of
static charge. Refer to “Electrostatic Discharge Information” on page 5-7.

At the top of the plug-in module are the

Channel

keys. These keys give you

access to the Channel Setup menu for each input. The Channel Setup menu is
displayed on the right side of the screen when the

Channel

key is pressed.

There are several types of softkeys available. A description of the different
softkeys and their functions is provided in the

Agilent 83480A, 54750A

User’s Quick Start Guide

supplied with the mainframe.

NOTE

The plug-in module has both an electrical channel and an optical channel. Although
many of the softkeys are similar, some differences exist. Examples in this book using the
optical channel will note when the user would see differences if using the electrical
channel.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
23
24
25
26
27
...
»

Содержание 83486A



























































































Отзывы:

Нет отзывов