Agilent Technologies 83437A Скачать руководство пользователя страница 76

Страница: 76 / 106

5-22

Servicing

Performance Tests

Test 2. Power Stability

Description

Power stability is verified using a power meter (> 30 dB return loss)

This test must be performed in a stable environment where the ambient tem-
perature changes less than 1

C throughout the test.

Procedure

Turn on the Agilent 83438A and the power meter. Allow them to warm up for
one hour.

Connect a power meter to the Agilent 83438A’s front-panel

OPTICAL OUT

connector.

Remove any BNC termination on the rear-panel

MODULATION INPUT

connector.

Configure the power meter to measure total drift in output power over 15
minutes. Start the test.

After 15 minutes have passed, the total output power should not have drifted
more than ±0.02 dB. Record the maximum drift on the following line:

Maximum drift (15 minutes): ____________ dB

Configure the power meter to measure total drift in output power over 6 hours.

After 6 hours have passed, the total output power should not have drifted more
than ±0.05 dB. Record the maximum drift on the following line:

Maximum drift (6 hours): ____________ dB

Содержание 83437A











































































































Результаты поиска

Содержание 83437A

Отзывы:

Agilent Technologies 83437A, Руководство пользователя, Страница: 76 / 106

Результаты поиска

Содержание 83437A

Отзывы: