Agilent Technologies 81200, Руководство по установке

Страница: 13 / 76

13
Chapter 2 Setting up a proprietary System
As the Agilent 81200 System is a very modular system which can be tailored to specific application
needs, but offers the possibility to be upgraded for future requirements, there are mainly three pre-
installed system configurations possible to order.
The initial setup of these Agilent 81200 System configuration is easy because the system is supplied
fully hardware and software installed. Only some additional connections to peripherals or to
interconnect the frames of an extended system need to be done.
NOTE: Large system configurations have higher power consumptions, so please make sure that the overall
system power requirements can be satisfied and is present at the place where the system has to be
installed.
For the next steps, please select from the following list the system configuration you have ordered and
received, then go to the section mentioned and perform the steps to set up the Agilent 81200 System
from the components you have received.
The Agilent 81200 System has the following major configurations
• Based on the 3-slot small mainframe Agilent E4840A, see setup instructions “Setting up an
Agilent 81200 System based on E4840A Small Mainframe” on page 16
• Based on the 10-slot mainframe Agilent E4849B/C, see setup instructions “Setting up an Agilent
81200 System based on Agilent E4849B/C Mainframe” on page 20
• Based on the mainframe Agilent E4849B/C and extender frame Agilent E4848B, see setup
instructions
“Setting up an Extended Agilent 81200 System based on Agilent E4849B/C and
Agilent E4848B Mainframes” on page 24
An extended Agilent 81200 system includes up to two Agilent E4848B Expander Frames, each
equipped with an MXI/VXI Interface Card Agilent E1482B. Each Expander Frame has 12 free
slots.
The Agilent E4849B/C mainframe includes also an Agilent E1482B MXI/VXI Interface card, so
there are 9 free slots.