4
Instructions for Use
Installation
Installation
The various components of the Ion Pump HV P.S. kit are shown in the
figure below:
Figure 6
Ion Pump HV P.S. Kit
1
Ion Pump HV P.S.
2
Strip of Velcro to fasten the Ion Pump P.S. to the pump body
The device is dispatched with the battery inserted in its housing but
with the contacts isolated by a strip of insulating Mylar.
To establish contact between the terminals of the battery and the
circuit of the device, proceed as follows:
56/68
Ion Pump Battery Power Supply User Manual / 87-900-111-01 (E)
