Agilent Technologies 6611C Скачать руководство пользователя | Manualshive

Страница: 10 / 103

background image

2 - Introduction to Programming

10

6.

To use the VXI

plug&play

instrument driver, follow the directions in the VXI

plug&play

online help

under “Introduction to Programming”.

Accessing Online Help

A comprehensive online programming reference is provided with the driver. It describes how to get
started using the instrument driver with Agilent VEE, LabVIEW, and LabWindows. It includes complete
descriptions of all function calls as well as example programs in C/C++ and Visual BASIC.

ñ

To access the online help when you have chosen the default Vxipnp start folder, click on the Start
button and select Programs | Vxipnp | Agxxxx Help (32-bit).
- where agxxxx is the instrument driver.

GPIB Capabilities of the DC Source

All dc source functions except for setting the GPIB address are programmable over the GPIB. The IEEE
488.2 capabilities of the dc source are listed in the Specifications Table of the User's Guide.

GPIB Address

The dc source operates from an GPIB address that is set from the front panel. To set the GPIB address,
press the Address key on the front panel and enter the address using the Entry keys. The GPIB address
is stored in non-volatile memory.

RS-232 Capabilities of the DC Source

The dc source provides an RS-232 programming interface, which is activated by commands located under
the front panel Address key. All SCPI and COMPatibility commands are available through RS-232
programming. When the RS-232 interface is selected, the GPIB interface is disabled.

The EIA RS-232 Standard defines the interconnections between Data Terminal Equipment (DTE) and
Data Communications Equipment (DCE). The dc source is designed to be a DTE. It can be connected to
another DTE such as a PC COM port through a null modem cable.

NOTE: The RS-232 settings in your program must match the settings specified in the front panel

Address menu. Press the front panel Address key if you need to change the settings.

RS-232 Data Format

The RS-232 data is a 10-bit word with one start bit and one stop bit. The number of start and stop bits is
not programmable. However, the following parity options are selectable using the front panel Address key:

EVEN  Seven data bits with even parity
ODD  Seven data bits with odd parity
MARK  Seven data bits with mark parity (parity is always true)
SPACE  Seven data bits with space parity (parity is always false)
NONE  Eight data bits without parity

Parity options are stored in non-volatile memory.

«
...
8
9
10
11
12
...
»

Содержание 6611C








































































































Отзывы:

Нет отзывов

Похожие инструкции для 6611C

Bomag BPR 70/70 D

Бренд: Fayat Group Страницы: 74

Бренд: Fayat Страницы: 110

Bomag BPR 25/40

Бренд: Fayat Страницы: 57

Бренд: yellow jacket Страницы: 2

Бренд: ZALMAN Страницы: 7

Бренд: Fromm Страницы: 27

Бренд: Cannondale Страницы: 12

Бренд: RIDGID Страницы: 2

X 18 V - MANUEL 3

Бренд: Parkside Страницы: 12

PNEUTORQUE PTM series

Бренд: norbar Страницы: 26

Бренд: Fein Страницы: 95

Бренд: Vector Страницы: 15

Бренд: Parkside Страницы: 55

Бренд: TDK-Lambda Страницы: 18

BAE PS-XA-1W-24-150-608-I

Бренд: Balluff Страницы: 12

Бренд: MDM Страницы: 5

Бренд: BlueSpot Страницы: 6

Бренд: Baileigh Industrial Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды