Agilent Technologies 5530, Руководство по началу работы

Страница: 104 / 150

Chapter 7 Analyzing, Transferring, and Printing Measurement Data
Changing the Data Display
7-4 Getting Started Guide
7
To move the comment box, in which the results of the numerical analysis
are displayed, to another part of the Analyze Data screen, follow these
steps:
1 Place the mouse cursor on the edge of the box.
2 Press and hold the mouse button and drag the box where you want it
displayed.
This box will also be displayed in this location the next time the screen is
displayed.
To save your measurement data, select Save Data. This button displays
the Save Data screen. See Chapter 5, “Setting Up the Software for a
Measurement,” for instructions on saving data. After the data is saved,
you return to the Analyze Data screen.
Changing the Data Display
Autoscaling
To alter the display to show only the portion of the graph that contains
data, select Autoscale Vertical. The display remains the same size and the
axes are scaled to display only the measurement data.
Adding text to your graph
To add text to your graph, follow these steps:
1 On the Analyze Data screen, select Add Text.
The mouse cursor changes to cross hairs.
2 Create a box.
For most kinds of measurements, including Linear as shown in
Figure 7-1, only one text box can be added to the Analyze Data screen. For
Timebase Linear measurements, two text boxes can be added, one for each
of the two graphs.