AGILE AV dsp amp, Руководство пользователя

Страница: 8 / 22

Stereo
audio in
Right speaker
Left speaker
PC amp V1.0
Led
Volume
Down
Volume Up
Ir Reciever
On/Off
Control
Panel
Figure 3
User manual version 1
AV dsp amp
Product overview
Before you can use the AV dsp amp in your particular setup, you first have to set
the right settings. This is done by pc software, called DSP filter design.
Please do not connect any speakers to your system yet!
When you want to set up a system with the AV dsp amp you apparently know what you
want. So with this information you can setup your system as follows:
Hardware part
Stereo setup: Connect the module to your pc by a USB cable and select on witch
side of the room your master module will be, the speaker with the
AV dsp amp. When your master is the left channel the slave will
become the right channel. When you want to set the master as
right channel with analogue input you will have to change the
input cinches, left in the right cinch and right in the left.
This is because only the right channel is linked trough, so if
you want the left channel to be linked trough you just switch
left and right. For digital sources the left and right channel
are linked.
Bridged
setup: Connect the module to your pc by a USB cable and select
where the master module is placed, master module is left or
right audio or functions as a subwoofer. When you use 2 AV dsp
amp for a stereo bridged setup you will also have to initialise
the second (slave) module, see example in the last chapter of
this document.
In bridged mode the jumper (see figure 2) must be placed and the
speaker must be connected between J4 and J2 .
- 8 -