AGILE AV dsp amp, Руководство пользователя

Страница: 20 / 22

User manual version 1
AV dsp amp
11. When download is completed you can power down the module
12. Start with the SLAVE module
Slave
1. Start the pc program, filter design. Or go back to the control panel
(ctrl+c) if the program is still running
2. Plug- in the power connector and switch the module to ON
3. Plug-in the USB cable (assumed that you’ve already installed the
software as described in chapter
“
Software installation )
”
4. Wait for automatic connection, now the program detects a slave module,
this is shown in a popup. If connection is not automatic the press the
connect button. If there is no response there is a problem with the USB
“ ”
connection
5. Switch to the Filter design Window under view, or press ctrl+f
6. Fill in your biquads with the desired filters or use the same filters as
the master module. In this preliminary software the high channel is
channel 1 and the low channel is channel 2
7. Download the filters to you module under Download, or press ctrl+F9
8. When download is completed you can power down the module and disconnect
the USB cable
9. Master and Slave are now set up as a 2 channel stereo system
Final setup
When both modules are installed it is time to complete your setup.
- First connect your speakers as explained in chapter Product overview
- Connect the trigger cable (mini jack)
or
SPDIF cable between both
modules, depending on the used audio source
- Power up master and slave module
- Turn on the master by control panel or remote
- Lower you source volume, prevent loud start-up volume
- Connect your source to the AV dsp amp
Ready!
Now the system is fully setup and can be controlled by the control panel, remote
control or by connecting the module to your pc. From now on you can update your
filters at any time, just repeat the Master and Slave steps.
* If your slave module is not turned on by the master try to power down the
slave, turn the master off, wait 5 seconds, power up slave and turn the master
back on
•
When there is something that does not work try to repeat the
installation
- 20 -