AGILE AV dsp amp, Руководство пользователя

Страница: 17 / 22

User manual version 1
AV dsp amp
As a rule of thumb, sharp dips are diffraction artefacts while sharp peaks are
caused by the drivers themselves. Exceptions are room resonances (if the
response is not correctly truncated) and diffractions on repetitive patterns.
The second step is designing the actual crossover filters. All the usual
strategies work. Delaying higher frequency drivers with respect to lower-
frequency ones is a powerful alternative to using asymmetric slopes and yields
substantially improved coherence through the crossover region.
Download
Under download the user can press load DSP to download its designed filters to
“ ”
the AV dsp amp.
Firmware update
Every module has the ability to update its firmware, when provides a new
firmware version. The firmware version of the module is shown in the statusbar
of the filter design window and under About.
The firmware can be easily updated by USB, the same for master and slave module.
Under option download you can find Firmware update . When this option is
“ ” “ ”
selected the user can select the new firmware file. This is a complete hex file
provided by , no adapts can and may be made by the user!
After the file is selected the update begins.
DO NOT DISCONNECT THE MODULE AT THIS PIONT!
When the progress bar is filled the update is completed. On a CRC error the
update is automatically restarted, after three errors the update is aborted.
Figure 11 shows a completed firmware update.
After restarting the module the new firmware is running.
Note that the new firmware does not have any filters installed, so the filters must be reloaded with the
correct values.
- 17 -