AGI 15100SA, Инструкция по сборке

Страница: 63 / 82

P1512161 R0 63
3.20. Install the Electric Remote Power Swing (Optional)
Æ
This section is applicable to the Swing Away models with electric power swing option.
3.20.1 Attach the Power Swing Axle to the SA Hopper
1. Attach the assembled power swing axle to the hopper weldment using 1/2" x 1-1/2" hex bolts (1) and 1/2"
locknuts (2). See Figure 55 .
Table 30. Fasteners
Item
Description Quantity
1
1/2" x 1-1/2" Hex Bolt Gr8 Plated
4
2
1/2" Nylock Nut Gr8
4
Figure 55. Attaching Electric Power Swing Axle to the Swing Away Hopper
3.20.2 Install the Receiver Box
Attach the Receiver Box
1. Mark a distance of approximately 24" from the edge of the spout to determine the location of the receiver
box assembly (2). See Figure 56 .
2. Attach the u-clamps (1) and receiver box assembly (2) to the swing away conveyor tube using hex bolts (3)
and locknuts (4).
3. Tighten the u-clamps until the tube begins to crimp.
Table 31. Electric Receiver Box Components
Item
Description Quantity
1
10" x 2-1/2" U-Clamp
2
2
Receiver Box Assembly
1
SWING AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR 3. ASSEMBLY