AGFEO AS 100 IT, Руководство пользователя

Страница: 168 / 204

3 - 14
Programming your
System
ST 25 DECT 30 ST 30
hS734Qª
Reset the System
Erase the Systems RAM
hS709Qª
System phone registration
Systemtelefone deregistration
If you plug a system phone of for use on another S0, you should deregstrate it. Otherwise
the extension number can not be used anymore.
Deregistrate system phones with the following procedure:
!
9#62
Programming mode must be started by entering:
*705
Lift receiver
Reset System
Acknowledgement tone, replace receiver
End Programming mode by entering:
*700
The System will reset
Programming mode must be started by entering:
*705
Lift receiver
Erase RAM
Acknowledgement tone, replace receiver
The System will resetted to delivery Settings
You can run 2 System Phone on every internal S0 of an AGFEO ISDN System. During
configuration of the System every phone is registered with a primary and perhaps a
secondary extension number.
When you plug a system phone into the system you have to register it.
If you plug a registered system phone of and plug it in on the same S0 after a while, you
don´t need to register it again.
If you plug it into another S0, you have to register it again.
The extension number can be changed at any time.