AGFEO AS 100 IT, Руководство пользователя

Страница: 13 / 204

1 - 5
System Telephones
ST 20/25 DECT 30 ST 30
Setting up and cleaning the system
telephones
Cleaning
Insertion of label strips for function
buttons
Place your nail between the insert and
telephone housing at the top. Then pull down
the clear insert so that it is bending outwards.
You now can remove the label insert. Insert
the new label and replace clear cover. Insert
bottom end first, bend outwards and then
insert into top slot.
All labels can be printed direct from your PC
with the use of TK-Set. This will aid to give
your phone that professional look.
Please find a suitable location for your phone and avoid any areas where it may be likely
for water or chemical spillages to occur.
Plastic feet of the phone:
The phone as been produced for normal use.
The feet of the apparatus may alter when in contact with chemicals, such as furniture
polish or other cleaning agent and could leave marks on surfaces. No liability will be
accepted if this should occur. It is therefore advisable to place the telephone
on a non slip matt to protect furniture from marking.
The cleaning of your telephone is relatively easy if you note the following points:
Please wipe the phone with a damp or anti static cloth.
DO NOT USE a dry cloth (as a static discharge could damage components in the phone)
Ensure when cleaning that no liquids will enter the housing as this could damage switches
and contacts.